Calculating a Maharashtra electricity bill manually can be difficult because the final payable amount includes more than basic electricity consumption charges. Residential consumers follow telescopic tariff slabs, while Wheeling Charges, Fuel Adjustment Charges, Tax on Sale, fixed monthly charges, and Electricity Duty are calculated separately.
- What Is the MSEDCL Electricity Bill Calculator?
- MSEDCL LT I(B) Residential Tariff Slabs
- Residential Wheeling Charge
- Fuel Adjustment Charge
- Tax on Sale
- Single Phase and Three Phase Residential Fixed Charges
- Residential Electricity Duty
- Supported MSEDCL Connection Categories
- Commercial LT II Tariff Overview
- Industrial LT V Tariff Overview
- How to Use the MSEDCL Electricity Bill Calculator
- Key Features of the MSEDCL Electricity Bill Calculator
- How the Estimated MSEDCL Bill Is Prepared
- Why Is Our MSEDCL Electricity Bill Calculator Different From Other Tools?
- MSEDCL LT I(B) Residential Tariff Calculation
- Commercial LT II Tariff Calculation
- Industrial LT V Tariff Calculation
- How the Estimated MSEDCL Bill Is Calculated
- Electricity-Saving Tips for MSEDCL Consumers
- Frequently Asked Questions
- Meta Information
- Featured Image Prompt
The MSEDCL Electricity Bill Calculator is an online utility designed for consumers served by Maharashtra State Electricity Distribution Company Limited, commonly known as Mahadiscom. It helps residential households, commercial establishments, industrial consumers, and other supported categories estimate their monthly electricity expenses before receiving the official bill.
Using the supplied Maharashtra Electricity Regulatory Commission FY 2026–27 tariff information, the calculator supports LT I(B) Residential telescopic slabs, Single Phase and Three Phase fixed charges, Commercial LT II tariffs, Industrial LT V rates, Wheeling Charges, Fuel Adjustment Charges, Tax on Sale, and category-specific Electricity Duty.
The tool is intended for eligible MSEDCL consumers in Pune, Thane, Navi Mumbai suburban areas, Nagpur, Nashik, Aurangabad, and other Mahadiscom service regions across Maharashtra.
Electricity consumption can vary considerably between different users. A small household may remain within the first residential slab, while a residence using air conditioners, geysers, refrigerators, water pumps, and multiple appliances may enter the higher ₹10.25, ₹13.80, or ₹15.80 tariff slabs. Shops, offices, restaurants, hotels, workshops, and industrial units follow separate energy and demand-charge structures.
The calculator simplifies the complete process by displaying slab-wise energy charges, Wheeling Charges, FAC, Tax on Sale, fixed charges, Electricity Duty, and the estimated net payable amount in a detailed itemized report.
What Is the MSEDCL Electricity Bill Calculator?
The MSEDCL Electricity Bill Calculator is an online electricity cost estimation tool for Maharashtra State Electricity Distribution Company Limited consumers.
It calculates an expected monthly bill using:
- Total electricity consumption in kWh
- Consumer category
- Single Phase or Three Phase connection
- Sanctioned or connected load where required
- Applicable Wheeling Charges
- Fuel Adjustment Charges
- Tax on Sale
- Category-specific Electricity Duty
Unlike a basic calculator that multiplies total monthly units by one electricity rate, this tool follows the supplied LT I(B) telescopic tariff structure. Only the units falling within a particular consumption slab are calculated at that slab’s rate.
After calculating the basic energy charge, the calculator adds the per-unit Wheeling Charge, FAC, Tax on Sale, applicable fixed charge, and configured Electricity Duty.
MSEDCL LT I(B) Residential Tariff Slabs
Under the supplied FY 2026–27 tariff configuration, residential consumers use the following monthly energy rates:
- 0–100 units: ₹5.05 per unit
- 101–300 units: ₹10.25 per unit
- 301–500 units: ₹13.80 per unit
- Above 500 units: ₹15.80 per unit
The residential calculation is telescopic. This means that a consumer using 250 units is not charged ₹10.25 for all 250 units.
Instead, the calculation is divided as follows:
- First 100 units: 100 × ₹5.05 = ₹505
- Remaining 150 units: 150 × ₹10.25 = ₹1,537.50
- Total basic energy charge: ₹2,042.50
The Wheeling Charge, FAC, Tax on Sale, fixed monthly charge, and Electricity Duty are then added separately.
Residential Wheeling Charge
The supplied residential Wheeling Charge is ₹1.35 per billed unit.
For example, a residential consumer using 250 units receives an estimated Wheeling Charge of:
250 × ₹1.35 = ₹337.50
Wheeling Charges relate to the use of the electricity distribution network. The calculator displays this amount separately instead of combining it with the basic energy tariff.
Fuel Adjustment Charge
The supplied Fuel Adjustment Charge is ₹0.679 per billed unit.
For 250 units, the estimated FAC is:
250 × ₹0.679 = ₹169.75
FAC may reflect changes in fuel and electricity procurement costs. The applicable official rate can change through regulatory adjustments, so consumers should compare the calculator result with their latest Mahadiscom bill.
Tax on Sale
The supplied Tax on Sale is ₹0.279 per billed unit.
For example:
- 100 units: 100 × ₹0.279 = ₹27.90
- 250 units: 250 × ₹0.279 = ₹69.75
- 500 units: 500 × ₹0.279 = ₹139.50
The calculator displays Tax on Sale separately from the basic energy charge, Wheeling Charge, FAC, fixed charge, and Electricity Duty.
Single Phase and Three Phase Residential Fixed Charges
The supplied LT I(B) fixed monthly charges depend on the residential connection phase:
- Single Phase Residential: ₹135 per month
- Three Phase Residential: ₹435 per month
Selecting the correct meter phase is important because the difference between Single Phase and Three Phase fixed charges can significantly affect the final estimated bill.
The connection phase is generally printed on the latest MSEDCL electricity bill or connection document.
Example: Residential Single Phase Consumer Using 250 Units
Using the supplied tariff configuration:
- Basic energy charge: ₹2,042.50
- Wheeling Charge: ₹337.50
- Fuel Adjustment Charge: ₹169.75
- Tax on Sale: ₹69.75
- Single Phase fixed charge: ₹135
Under the supplied residential calculation rule, 16% Electricity Duty is applied to the configured base consisting of the basic energy charge, Wheeling Charge, FAC, and fixed charge.
- Configured duty base: ₹2,684.75
- Illustrative Electricity Duty at 16%: ₹429.56
- Illustrative estimated total: ₹3,184.06
The official bill may use revised FAC values, different rounding treatment, or additional account-specific adjustments.
Residential Electricity Duty
The supplied Residential Electricity Duty rate is 16%.
Under the provided calculator configuration, the duty base includes:
- Basic energy charges
- Wheeling Charges
- Fuel Adjustment Charges
- Residential fixed charges
Tax on Sale is displayed as a separate per-unit component under the supplied calculation structure.
The exact official duty base should always be checked against the latest MSEDCL bill and applicable regulatory rules.
Supported MSEDCL Connection Categories
The calculator can support the following categories using the supplied tariff information:
- LT I(B) Residential Single Phase
- LT I(B) Residential Three Phase
- LT II Commercial Non-Residential
- LT V Industrial
- EV Charging after the applicable tariff is configured
A specific EV Charging energy rate, fixed charge, Wheeling Charge, and Electricity Duty treatment were not included in the supplied data. The EV category should only be activated after its applicable tariff rules have been configured.
Commercial LT II Tariff Overview
Under the supplied Commercial LT II configuration:
- Energy charge: ₹12.30 per unit
- Wheeling Charge: ₹1.35 per unit
- Fixed demand charge: ₹525 per kW per month
- Electricity Duty: 21%
The residential fixed-charge and duty rules do not apply to Commercial LT II connections.
Industrial LT V Tariff Overview
Under the supplied Industrial LT V configuration:
- Energy charge: ₹7.15 per unit
- Wheeling Charge: ₹1.14 per unit
- Fixed demand charge: ₹420 per kW per month
- Electricity Duty: 9%
Industrial consumers should enter the official connected or sanctioned load in kW to calculate the fixed demand charge.
How to Use the MSEDCL Electricity Bill Calculator
Calculate Your Mahadiscom Bill in Four Steps
Step 1: Select the Connection Type
Choose Residential Single Phase, Residential Three Phase, Commercial LT II, Industrial LT V, or another fully configured category.
Step 2: Enter Monthly Consumption
Enter the complete electricity units recorded during the monthly billing cycle.
Step 3: Enter Sanctioned Load
Commercial and Industrial consumers should enter the official connected load in kW.
Step 4: Calculate the Bill
Click Calculate Bill to view energy charges, Wheeling Charges, FAC, Tax on Sale, fixed charges, Electricity Duty, and the estimated payable amount.
Key Features of the MSEDCL Electricity Bill Calculator
- Residential telescopic calculation: Divides units across four supplied LT I(B) slabs.
- Phase-based fixed charges: Applies separate Single Phase and Three Phase amounts.
- Wheeling Charge calculation: Adds the applicable per-unit network charge.
- FAC calculation: Calculates the supplied ₹0.679 for every billed unit.
- Tax on Sale: Adds the configured ₹0.279 per unit separately.
- Category-wise duty: Supports 16% Residential, 21% Commercial, and 9% Industrial duty.
- Commercial and industrial support: Calculates energy, wheeling, and load-based charges.
- Detailed report: Displays every available component for viewing, printing, or downloading.
How the Estimated MSEDCL Bill Is Prepared
The calculator first identifies the selected category, monthly consumption, meter phase, and sanctioned load where required.
Residential energy consumption is distributed across the applicable telescopic slabs. The calculator then adds Wheeling Charges, FAC, Tax on Sale, and the phase-based fixed charge.
The applicable Residential, Commercial, or Industrial Electricity Duty is calculated according to the configured taxable components.
The result remains an estimate. An official MSEDCL bill may include arrears, delayed payment surcharge, meter charges, security-deposit adjustments, FAC revisions, penalties, rounding differences, or updated regulatory components.
Why Is Our MSEDCL Electricity Bill Calculator Different From Other Tools?
A Maharashtra electricity bill cannot be estimated accurately by multiplying total monthly consumption by a single tariff rate. Residential consumers follow telescopic energy slabs, while Wheeling Charges, Fuel Adjustment Charges, Tax on Sale, phase-based fixed charges, and Electricity Duty must be calculated separately.
The MSEDCL Electricity Bill Calculator processes every configured component individually. It divides residential consumption across the applicable LT I(B) slabs, identifies the selected connection phase, calculates per-unit surcharges, adds fixed or demand charges, applies category-specific Electricity Duty, and displays an itemized estimated bill.
| Feature | MSEDCL Calculator | Basic Calculator |
|---|---|---|
| Residential Energy Charge | Calculates every telescopic slab separately | May multiply all units by one rate |
| Wheeling Charge and FAC | Adds each configured per-unit charge separately | May exclude adjustment charges |
| Connection Phase | Uses separate Single and Three Phase fixed charges | May ignore the phase difference |
| Category-Wise Duty | Supports Residential, Commercial, and Industrial duty rates | May apply one general percentage |
MSEDCL LT I(B) Residential Tariff Calculation
| Monthly Consumption Slab | Energy Rate | Wheeling Charge |
|---|---|---|
| 0–100 units | ₹5.05/unit | ₹1.35/unit |
| 101–300 units | ₹10.25/unit | ₹1.35/unit |
| 301–500 units | ₹13.80/unit | ₹1.35/unit |
| Above 500 units | ₹15.80/unit | ₹1.35/unit |
The residential energy charge is telescopic. Wheeling Charge, FAC, and Tax on Sale are calculated on the applicable billed units rather than being included within the slab rate.
Example: Single Phase Residential Consumer Using 250 Units
- First 100 units: 100 × ₹5.05 = ₹505
- Remaining 150 units: 150 × ₹10.25 = ₹1,537.50
- Total energy charge: ₹2,042.50
- Wheeling Charge: 250 × ₹1.35 = ₹337.50
- FAC: 250 × ₹0.679 = ₹169.75
- Tax on Sale: 250 × ₹0.279 = ₹69.75
- Single Phase fixed charge: ₹135
Under the supplied Residential configuration, the duty base includes energy charges, Wheeling Charges, FAC, and the fixed charge.
- Configured duty base: ₹2,684.75
- Electricity Duty at 16%: ₹429.56
- Illustrative estimated bill: ₹3,184.06
Single Phase Versus Three Phase at 250 Units
A Three Phase residential consumer has the same energy and per-unit charges but uses a ₹435 monthly fixed charge.
- Three Phase duty base: ₹2,984.75
- Electricity Duty at 16%: ₹477.56
- Illustrative Three Phase total: ₹3,532.06
The estimated difference is caused by the higher fixed charge and the additional duty generated when the fixed charge forms part of the configured duty base.
Example: Residential Consumer Using 450 Units
For a Single Phase connection using 450 units:
- First 100 units: 100 × ₹5.05 = ₹505
- Units 101–300: 200 × ₹10.25 = ₹2,050
- Units 301–450: 150 × ₹13.80 = ₹2,070
- Total energy charge: ₹4,625
- Wheeling Charge: ₹607.50
- FAC: ₹305.55
- Tax on Sale: ₹125.55
- Single Phase fixed charge: ₹135
- Configured duty base: ₹5,673.05
- Electricity Duty at 16%: ₹907.69
- Illustrative estimated total: ₹6,706.29
Example: Residential Consumer Using 550 Units
Consumption above 500 units enters the highest supplied residential slab.
- First 100 units: ₹505
- Next 200 units: ₹2,050
- Next 200 units: ₹2,760
- Remaining 50 units: 50 × ₹15.80 = ₹790
- Total energy charge: ₹6,105
- Wheeling Charge: ₹742.50
- FAC: ₹373.45
- Tax on Sale: ₹153.45
- Single Phase fixed charge: ₹135
- Electricity Duty: ₹1,176.95
- Illustrative estimated total: ₹8,686.35
Commercial LT II Tariff Calculation
The Commercial LT II category may apply to eligible shops, offices, restaurants, clinics, hotels, showrooms, and other non-residential premises.
- Energy charge: ₹12.30 per unit
- Wheeling Charge: ₹1.35 per unit
- Fixed demand charge: ₹525 per kW per month
- Electricity Duty: 21%
Example: Commercial Consumer Using 400 Units
Suppose a Commercial LT II connection uses 400 units with a sanctioned load of 5 kW.
- Energy charge: 400 × ₹12.30 = ₹4,920
- Wheeling Charge: 400 × ₹1.35 = ₹540
- FAC: 400 × ₹0.679 = ₹271.60
- Tax on Sale: 400 × ₹0.279 = ₹111.60
- Fixed demand charge: 5 × ₹525 = ₹2,625
- Illustrative 21% duty: ₹1,754.89 when applied to the configured base excluding Tax on Sale
- Illustrative estimated total: ₹10,223.09
The actual commercial duty base and applicability of each adjustment component should be checked against the official Mahadiscom bill.
Industrial LT V Tariff Calculation
- Energy charge: ₹7.15 per unit
- Wheeling Charge: ₹1.14 per unit
- Fixed demand charge: ₹420 per kW per month
- Electricity Duty: 9%
Example: Industrial Consumer Using 1,000 Units
For an Industrial LT V connection using 1,000 units with a sanctioned load of 10 kW:
- Energy charge: 1,000 × ₹7.15 = ₹7,150
- Wheeling Charge: 1,000 × ₹1.14 = ₹1,140
- FAC: ₹679
- Tax on Sale: ₹279
- Fixed demand charge: 10 × ₹420 = ₹4,200
- Illustrative 9% duty: ₹1,185.21
- Illustrative estimated total: ₹14,633.21
How the Estimated MSEDCL Bill Is Calculated
- Select Residential Single Phase, Residential Three Phase, Commercial, or Industrial.
- Enter total monthly electricity consumption.
- Enter sanctioned load for Commercial or Industrial connections.
- Calculate Residential energy charges through telescopic slabs.
- Add the applicable Wheeling Charge.
- Calculate FAC and Tax on Sale per billed unit.
- Add the phase-based fixed charge or per-kW demand charge.
- Apply the configured category-specific Electricity Duty.
- Display every component and the estimated payable amount.
Electricity-Saving Tips for MSEDCL Consumers
- Monitor consumption near the 100, 300, and 500-unit slab limits.
- Use LED lighting and energy-efficient appliances.
- Set air conditioners near 24–26°C.
- Switch off unused chargers and standby devices.
- Maintain geysers, refrigerators, water pumps, and industrial equipment.
- Select the correct Single Phase or Three Phase connection.
- Use the official sanctioned load for Commercial and Industrial estimates.
- Compare the latest FAC with previous Mahadiscom bills.
The official MSEDCL bill may also include arrears, delayed payment surcharge, meter charges, security-deposit adjustments, revised FAC, penalties, rounding differences, or updated regulatory components.
Frequently Asked Questions
How accurate is the MSEDCL Electricity Bill Calculator?
The calculator uses the supplied MERC FY 2026–27 tariff information to estimate LT I(B) Residential, LT II Commercial, and LT V Industrial bills. It includes telescopic energy charges, Wheeling Charges, FAC, Tax on Sale, fixed charges, and category-specific Electricity Duty. The official bill may differ because of revised charges, arrears, penalties, or account-specific adjustments.
What is the full form of MSEDCL?
MSEDCL stands for Maharashtra State Electricity Distribution Company Limited. It is also commonly known as Mahadiscom and supplies electricity across many regions of Maharashtra.
Which areas can use the MSEDCL Electricity Bill Calculator?
The calculator is intended for eligible Mahadiscom consumers in Pune, Thane, Navi Mumbai suburban areas, Nagpur, Nashik, Aurangabad, and other MSEDCL service regions across Maharashtra.
What are the supplied MSEDCL residential tariff rates?
The supplied LT I(B) rates are ₹5.05 per unit for the first 100 units, ₹10.25 from 101 to 300 units, ₹13.80 from 301 to 500 units, and ₹15.80 per unit above 500.
How does the residential telescopic tariff work?
Monthly consumption is divided across separate tariff slabs. Only the units falling within a particular slab are charged at that slab’s rate instead of multiplying the complete consumption by the highest rate reached.
How are 250 residential units calculated?
The first 100 units cost ₹505 at ₹5.05 per unit, while the remaining 150 units cost ₹1,537.50 at ₹10.25. The total basic energy charge is ₹2,042.50 before Wheeling Charges, FAC, Tax on Sale, fixed charges, and duty.
How are 450 residential units calculated?
The first 100 units cost ₹505, the next 200 units cost ₹2,050, and the remaining 150 units cost ₹2,070. The total basic energy charge is ₹4,625 before additional bill components.
How are 550 residential units calculated?
The first 100 units cost ₹505, the next 200 cost ₹2,050, the next 200 cost ₹2,760, and the remaining 50 units cost ₹790. The total basic energy charge is ₹6,105.
What is the MSEDCL Wheeling Charge?
Wheeling Charges relate to use of the electricity distribution network. The supplied Residential and Commercial rate is ₹1.35 per unit, while the supplied Industrial LT V rate is ₹1.14 per unit.
How much is the residential Wheeling Charge for 250 units?
Using the supplied rate, the calculation is 250 × ₹1.35, which produces an estimated Wheeling Charge of ₹337.50.
What is FAC in an MSEDCL electricity bill?
FAC means Fuel Adjustment Charge. The supplied calculator configuration uses ₹0.679 per billed unit and displays it separately from the basic energy and Wheeling Charges.
How much is FAC for 250 units?
FAC for 250 units is calculated as 250 × ₹0.679, which equals ₹169.75. The official FAC rate may change through regulatory adjustments.
What is Tax on Sale in the MSEDCL bill?
The supplied Tax on Sale is ₹0.279 per billed unit. It is calculated separately from basic energy charges, Wheeling Charges, FAC, fixed charges, and Electricity Duty.
How much is Tax on Sale for 250 units?
The calculation is 250 × ₹0.279, resulting in an estimated Tax on Sale of ₹69.75.
What is the Single Phase residential fixed charge?
The supplied LT I(B) Single Phase residential fixed charge is ₹135 per month. It is added regardless of monthly electricity consumption.
What is the Three Phase residential fixed charge?
The supplied Three Phase residential fixed charge is ₹435 per month. Selecting the correct phase is important because this charge is ₹300 higher than the Single Phase amount.
Where can I find my connection phase?
The connection phase is generally printed on the latest MSEDCL bill, meter information, or connection document. Consumers should select the official Single Phase or Three Phase status.
How is Residential Electricity Duty calculated?
The supplied Residential Electricity Duty rate is 16%. Under the configured calculator logic, it is applied to basic energy charges, Wheeling Charges, FAC, and the applicable residential fixed charge.
Is Tax on Sale included in the residential duty base?
Under the supplied calculator structure, Tax on Sale is displayed separately and is not included in the configured residential duty base. The official treatment should be checked against the latest Mahadiscom bill.
What is the estimated Single Phase bill for 250 units?
Using the supplied configuration, the illustrative amount is ₹3,184.06. This includes energy charges, Wheeling Charges, FAC, Tax on Sale, a ₹135 fixed charge, and 16% Electricity Duty on the configured base.
What is the estimated Three Phase bill for 250 units?
Using the supplied rates and a ₹435 fixed charge, the illustrative Three Phase estimate is ₹3,532.06. The official bill may differ because of FAC revisions, rounding, or other adjustments.
How is a Commercial LT II bill calculated?
Commercial consumption is calculated at the supplied rate of ₹12.30 per unit. A ₹1.35-per-unit Wheeling Charge, FAC, Tax on Sale, ₹525-per-kW fixed demand charge, and 21% Electricity Duty are added separately.
How are 400 Commercial LT II units calculated?
The basic energy charge is ₹4,920. For a 5 kW connection, the fixed demand charge is ₹2,625. Wheeling Charges, FAC, Tax on Sale, and the configured 21% duty are then added.
How is an Industrial LT V bill calculated?
Industrial LT V consumption is calculated at the supplied rate of ₹7.15 per unit. A ₹1.14-per-unit Wheeling Charge, ₹420-per-kW demand charge, FAC, Tax on Sale, and 9% Electricity Duty are added separately.
Can I calculate my Pune, Thane, or Nagpur electricity bill online?
Yes. Select the category and phase printed on your bill, enter monthly consumption and sanctioned load where required, and click Calculate Bill to view the estimated breakdown.
Does the calculator support EV charging connections?
An EV Charging option may appear, but its specific energy rate, Wheeling Charge, fixed charge, FAC treatment, and Electricity Duty were not included in the supplied data. It should only be enabled after configuration.
Why can the estimate differ from the official MSEDCL bill?
The official bill may include revised FAC, updated tariffs, arrears, delayed payment surcharge, meter charges, security-deposit adjustments, penalties, rounding differences, or other regulatory components.
Can I download or print the detailed MSEDCL bill report?
Yes. The report can show category, connection phase, monthly units, slab-wise energy charges, Wheeling Charges, FAC, Tax on Sale, fixed or demand charges, Electricity Duty, and estimated payable amount.
Meta Information
Meta Title: MSEDCL Electricity Bill Calculator | Mahadiscom Bill
Meta Description: Calculate your MSEDCL electricity bill using supplied MERC FY 2026-27 rates. Check residential slabs, Wheeling Charges, FAC, Tax on Sale and duty.
Focus Keyword: MSEDCL Electricity Bill Calculator
Post Slug: msedcl-electricity-bill-calculator
Meta URL: /maharashtra/msedcl-electricity-bill-calculator
Featured Image Title: MSEDCL Electricity Bill Calculator for Maharashtra
Featured Image Alt Tag: MSEDCL Electricity Bill Calculator showing Maharashtra residential tariff slabs, Wheeling Charges, FAC, Tax on Sale and bill summary
Featured Image Caption: Estimate Mahadiscom residential, commercial and industrial electricity charges with Wheeling Charges, FAC and category-wise duty.
Featured Image Prompt
Create a premium glossy 3D electricity bill calculator poster in 1200×630 landscape format. On the left, place large sharp 3D text in three lines: “MSEDCL” in bright electric blue, “Maharashtra” in glossy white or silver, and “Bill Calculator” in vivid orange. Add compact glowing badges reading “MAHADISCOM,” “WHEELING CHARGE,” “FAC,” and “TAX ON SALE.” In the center-right, show a realistic modern smart electricity meter with a glowing digital display showing monthly units, connection phase and a rupee bill amount, surrounded by intense cyan lightning and flowing electric-energy lines. On the far right, add two floating glass panels: a Bill Overview panel showing total units, connection phase, fixed charge, Wheeling Charge, FAC, Electricity Duty and net bill; and a Tariff Details panel showing LT I(B) Residential slabs, Commercial LT II tariff, Industrial LT V tariff, Tax on Sale and category-specific duty rates. At the bottom right, place a black digital calculator with orange buttons, metallic rupee coins and a printed Mahadiscom electricity bill receipt. At the bottom center, create a raised glowing 3D map of Maharashtra with location pins for Pune, Thane, Navi Mumbai, Nagpur, Nashik and Aurangabad. Add subtle regional elements including the Mumbai and Navi Mumbai skyline, Pune technology and residential districts, Nagpur city structures, industrial zones, rural electricity networks, solar parks, wind turbines, substations, transmission towers and futuristic smart-grid lines. Include glowing feature tiles for Telescopic Residential Slabs, Single and Three Phase Charges, Wheeling Charge, FAC, Tax on Sale, Commercial and Industrial Tariffs, and Duty Breakdown. Use a deep navy-blue background, intense cyan glow, glossy white highlights, saffron-orange accents and rich metallic gold details. Keep the title highly readable, maintain a clean balanced composition, and include no people, watermark or unrelated logos.
