Calculating an Uttar Pradesh electricity bill manually can be difficult because the payable amount depends on consumer category, monthly consumption, sanctioned load, meter phase, fixed demand charges, meter rent, and Electricity Duty.
- What Is the UPPCL Electricity Bill Calculator?
- UPPCL LMV-1 Domestic Urban Tariff Slabs
- UPPCL LMV-1 Domestic Rural Tariff Slabs
- BPL Lifeline Domestic Tariff
- Sanctioned-Load-Based Fixed Charges
- Meter Rent and Electricity Duty
- Supported UPPCL Connection Categories
- Commercial and Industrial Tariff Overview
- How to Use the UPPCL Electricity Bill Calculator
- Key Features of the UPPCL Electricity Bill Calculator
- How the Estimated UPPCL Bill Is Prepared
- Why Is Our UPPCL Electricity Bill Calculator Different From Other Tools?
- LMV-1 Domestic Urban Tariff Calculation
- LMV-1 Domestic Rural Tariff Calculation
- BPL Lifeline Domestic Calculation
- LMV-2 Non-Domestic Commercial Tariff
- LMV-6 Small Industrial Tariff
- How the Estimated UPPCL Bill Is Calculated
- Electricity-Saving Tips for UPPCL Consumers
- Frequently Asked Questions
The UPPCL Electricity Bill Calculator is an online utility designed to help electricity consumers across Uttar Pradesh estimate their monthly bill before receiving the official statement.
Using the supplied Uttar Pradesh Electricity Regulatory Commission FY 2026–27 tariff information, the calculator supports LMV-1 Domestic Urban, LMV-1 Domestic Rural, BPL Lifeline, LMV-2 Non-Domestic Commercial, and LMV-6 Small Industrial categories.
The tool can be used by eligible consumers served through Uttar Pradesh distribution companies and service zones, including:
- PVVNL: Paschimanchal Vidyut Vitran Nigam Limited
- MVVNL: Madhyanchal Vidyut Vitran Nigam Limited
- DVVNL: Dakshinanchal Vidyut Vitran Nigam Limited
- PuVVNL: Purvanchal Vidyut Vitran Nigam Limited
- KESCO: Kanpur Electricity Supply Company
Consumers in Noida, Ghaziabad, Meerut, Lucknow, Kanpur, Agra, Varanasi, Prayagraj, Gorakhpur, and other covered Uttar Pradesh areas can use the calculator after selecting the correct category printed on their latest electricity bill.
The calculator prepares a transparent breakdown showing energy charges, sanctioned-load-based fixed charges, meter rent, Electricity Duty, and the estimated net payable amount.
What Is the UPPCL Electricity Bill Calculator?
The UPPCL Electricity Bill Calculator is an online electricity cost estimation tool for eligible Uttar Pradesh Power Corporation Limited consumers.
It calculates an expected monthly bill using:
- Total electricity consumption in kWh
- Consumer category
- Urban, Rural, or BPL classification
- Sanctioned load in kW
- Single Phase or Three Phase meter
- Applicable Electricity Duty
Unlike a basic calculator that multiplies all electricity units by one rate, the UPPCL calculator applies the supplied telescopic tariff structure. Each portion of monthly consumption is charged at the rate assigned to that tariff slab.
The tool also calculates fixed demand charges separately because these charges depend on sanctioned load rather than monthly electricity usage.
UPPCL LMV-1 Domestic Urban Tariff Slabs
Under the supplied tariff information, LMV-1 Domestic Urban consumers use the following monthly energy rates:
- 0–150 units: ₹5.50 per unit
- 151–300 units: ₹6.00 per unit
- 301–500 units: ₹6.50 per unit
- Above 500 units: ₹7.00 per unit
The supplied Urban Domestic fixed demand charge is ₹110 per kW per month.
Example: Urban Domestic Consumer Using 280 Units
Suppose an Urban Domestic consumer uses 280 units with a sanctioned load of 2 kW.
- First 150 units: 150 × ₹5.50 = ₹825
- Remaining 130 units: 130 × ₹6.00 = ₹780
- Total energy charge: ₹1,605
- Fixed demand charge: 2 × ₹110 = ₹220
- Meter rent: ₹20 for Single Phase or ₹50 for Three Phase
- Electricity Duty: Calculated separately at the configured 5% rate
This telescopic method is more useful than multiplying all 280 units by ₹6.00.
UPPCL LMV-1 Domestic Rural Tariff Slabs
Rural Domestic consumers use different supplied energy and fixed-charge rates:
- 0–100 units: ₹3.35 per unit
- 101–150 units: ₹3.85 per unit
- 151–300 units: ₹5.00 per unit
- 301–500 units: ₹5.50 per unit
- Above 500 units: ₹6.00 per unit
The supplied Rural Domestic fixed demand charge is ₹90 per kW per month.
For example, a Rural consumer using 200 units is calculated by charging the first 100 units at ₹3.35, the next 50 units at ₹3.85, and the remaining 50 units at ₹5.00 per unit.
Selecting the correct Urban or Rural category is essential because both the energy rates and fixed demand charges are different.
BPL Lifeline Domestic Tariff
The supplied Lifeline BPL category applies to eligible domestic connections with sanctioned load not exceeding 1 kW.
- Energy rate: ₹3.00 per unit
- Fixed demand charge: ₹50 per kW per month
- Maximum supported load: 1 kW under the supplied category description
The supplied information does not specify a separate monthly consumption limit for this category. Therefore, the calculator should apply only the configured BPL eligibility and tariff rules rather than assuming an unsupported free-unit benefit.
Consumers should select BPL Lifeline only when the same category appears on their official electricity bill or connection record.
Sanctioned-Load-Based Fixed Charges
UPPCL fixed demand charges are calculated according to the sanctioned load in kW.
- Urban Domestic: ₹110 per kW per month
- Rural Domestic: ₹90 per kW per month
- BPL Lifeline: ₹50 per kW per month
- LMV-2 Commercial: ₹330 per kW per month
- LMV-6 Industrial: ₹290 per kW per month
For example, a 3 kW Urban Domestic connection receives a fixed demand charge of:
3 × ₹110 = ₹330 per month
The sanctioned load is generally printed on the latest UPPCL or DISCOM electricity bill. Consumers should enter the official value rather than estimating it from installed appliances.
Meter Rent and Electricity Duty
The supplied calculator configuration includes the following additional components:
- Single Phase meter rent: ₹20 per month
- Three Phase meter rent: ₹50 per month
- Electricity Duty: 5%
- Billing cycle: Monthly
The calculator displays meter rent separately from the energy and fixed demand charges.
The configured 5% Electricity Duty is also shown as a separate bill component. The precise official taxable base should be checked against the latest electricity bill because duty may apply to selected billing components.
Supported UPPCL Connection Categories
The calculator supports the following categories using the supplied tariff information:
- LMV-1 Domestic Urban
- LMV-1 Domestic Rural
- BPL Lifeline Domestic
- LMV-2 Non-Domestic Commercial Urban
- LMV-6 Small Industrial Power
Each category follows different energy rates and fixed demand charges. Selecting the wrong consumer category can significantly change the estimated result.
Commercial and Industrial Tariff Overview
Under the supplied LMV-2 Commercial structure:
- 0–300 units: ₹7.50 per unit
- Above 300 units: ₹8.50 per unit
- Fixed demand charge: ₹330 per kW per month
LMV-6 Small Industrial consumers use:
- Energy charge: ₹7.30 per unit
- Fixed demand charge: ₹290 per kW per month
Domestic tariff benefits do not apply to Commercial or Industrial connections.
How to Use the UPPCL Electricity Bill Calculator
Calculate Your UPPCL Bill in Five Steps
Step 1: Select the Consumer Category
Choose Domestic Urban, Domestic Rural, BPL Lifeline, Commercial LMV-2, or Industrial LMV-6.
Step 2: Enter Monthly Electricity Units
Enter the complete electricity consumption recorded during the monthly billing cycle.
Step 3: Enter Sanctioned Load
Enter the official connected load in kW to calculate the fixed demand charge.
Step 4: Select the Meter Phase
Choose Single Phase or Three Phase to apply the corresponding meter rent.
Step 5: Calculate the Bill
Click Calculate Bill to view energy charges, fixed demand charges, meter rent, Electricity Duty, and the estimated payable amount.
Key Features of the UPPCL Electricity Bill Calculator
- Urban and Rural support: Uses separate LMV-1 energy and fixed-charge rates.
- Telescopic slab calculation: Distributes consumption across every applicable tariff bracket.
- BPL Lifeline support: Handles eligible low-load connections using the supplied tariff.
- All major UP DISCOM zones: Supports unified estimates for PVVNL, MVVNL, DVVNL, PuVVNL, and KESCO areas.
- Load-based fixed charges: Calculates demand charges according to sanctioned kW.
- Meter phase selection: Applies Single Phase or Three Phase meter rent.
- Commercial and industrial support: Calculates LMV-2 and LMV-6 charges.
- Detailed report: Displays energy, fixed charges, meter rent, duty, and estimated total separately.
How the Estimated UPPCL Bill Is Prepared
The calculator first identifies the selected category, monthly consumption, sanctioned load, and meter phase.
Domestic energy consumption is distributed across the applicable Urban or Rural telescopic slabs. BPL, Commercial, and Industrial consumers are calculated using their supplied category-specific rates.
The calculator then adds the per-kW fixed demand charge, phase-based meter rent, and configured 5% Electricity Duty.
The result remains an estimate. An official electricity bill may include arrears, delayed payment surcharge, meter adjustments, security-deposit revisions, penalties, rounding differences, or updated regulatory components.
Why Is Our UPPCL Electricity Bill Calculator Different From Other Tools?
An Uttar Pradesh electricity bill cannot always be estimated by multiplying total monthly consumption by one general rate. Domestic consumers follow telescopic energy slabs, Urban and Rural tariffs are different, fixed demand charges depend on sanctioned load, and meter rent changes according to the selected meter phase.
The UPPCL Electricity Bill Calculator processes each billing component separately. It identifies the selected consumer category, distributes consumption across the applicable slabs, calculates the per-kW fixed demand charge, adds Single Phase or Three Phase meter rent, applies the configured 5% Electricity Duty, and displays an itemized estimated bill.
| Feature | UPPCL Calculator | Basic Calculator |
|---|---|---|
| Domestic Tariff | Calculates every telescopic slab separately | May multiply all units by one rate |
| Urban and Rural Categories | Uses separate energy and fixed-charge rates | May treat all domestic consumers equally |
| Sanctioned Load | Calculates the applicable per-kW charge | May ignore connected load |
| Meter Phase | Adds Single or Three Phase meter rent | May exclude meter-related charges |
LMV-1 Domestic Urban Tariff Calculation
| Monthly Consumption | Energy Rate | Calculation Treatment |
|---|---|---|
| 0–150 units | ₹5.50/unit | Applied to the first 150 units |
| 151–300 units | ₹6.00/unit | Applied to the next 150 units |
| 301–500 units | ₹6.50/unit | Applied to units within this slab |
| Above 500 units | ₹7.00/unit | Applied only to units exceeding 500 |
Example: Urban Domestic Consumer Using 280 Units
Suppose an Urban Domestic consumer uses 280 units with a sanctioned load of 2 kW and a Single Phase meter.
- First 150 units: 150 × ₹5.50 = ₹825
- Remaining 130 units: 130 × ₹6.00 = ₹780
- Total energy charge: ₹1,605
- Fixed demand charge: 2 × ₹110 = ₹220
- Single Phase meter rent: ₹20
- Subtotal before duty: ₹1,845
- Illustrative 5% duty: ₹92.25 when applied to the subtotal
- Illustrative estimated total: ₹1,937.25
The official Electricity Duty base should be checked against the taxable components printed on the actual electricity bill.
Example: Urban Domestic Consumer Using 550 Units
- First 150 units: 150 × ₹5.50 = ₹825
- Units 151–300: 150 × ₹6.00 = ₹900
- Units 301–500: 200 × ₹6.50 = ₹1,300
- Remaining 50 units: 50 × ₹7.00 = ₹350
- Total energy charge: ₹3,375
The applicable fixed demand charge, meter rent, and Electricity Duty are added separately.
LMV-1 Domestic Rural Tariff Calculation
| Monthly Consumption | Rural Energy Rate |
|---|---|
| 0–100 units | ₹3.35/unit |
| 101–150 units | ₹3.85/unit |
| 151–300 units | ₹5.00/unit |
| 301–500 units | ₹5.50/unit |
| Above 500 units | ₹6.00/unit |
Example: Rural Domestic Consumer Using 280 Units
Suppose a Rural Domestic consumer uses 280 units with a sanctioned load of 2 kW and a Single Phase meter.
- First 100 units: 100 × ₹3.35 = ₹335
- Next 50 units: 50 × ₹3.85 = ₹192.50
- Remaining 130 units: 130 × ₹5.00 = ₹650
- Total energy charge: ₹1,177.50
- Fixed demand charge: 2 × ₹90 = ₹180
- Single Phase meter rent: ₹20
- Subtotal before duty: ₹1,377.50
- Illustrative 5% duty: ₹68.88
- Illustrative estimated total: ₹1,446.38
This comparison shows how Urban and Rural consumers with identical consumption and sanctioned load can receive different estimates.
BPL Lifeline Domestic Calculation
The supplied BPL Lifeline category applies to eligible domestic connections with sanctioned load up to 1 kW.
- Energy rate: ₹3.00 per unit
- Fixed demand charge: ₹50 per kW per month
- Maximum configured load: 1 kW
Example: BPL Lifeline Consumer Using 80 Units
- Energy charge: 80 × ₹3.00 = ₹240
- Fixed charge for 1 kW: ₹50
- Single Phase meter rent: ₹20
- Subtotal before duty: ₹310
- Illustrative 5% duty: ₹15.50
- Illustrative estimated total: ₹325.50
The supplied information does not describe free units or another subsidy for this category. The calculator should therefore avoid applying an unsupported rebate.
LMV-2 Non-Domestic Commercial Tariff
The LMV-2 category may apply to eligible shops, offices, clinics, restaurants, hotels, showrooms, and other non-domestic premises.
- 0–300 units: ₹7.50 per unit
- Above 300 units: ₹8.50 per unit
- Fixed demand charge: ₹330 per kW per month
Example: Commercial Consumer Using 400 Units
Using telescopic treatment under the supplied structure:
- First 300 units: 300 × ₹7.50 = ₹2,250
- Remaining 100 units: 100 × ₹8.50 = ₹850
- Total energy charge: ₹3,100
- Fixed charge for 5 kW: 5 × ₹330 = ₹1,650
- Three Phase meter rent: ₹50
- Subtotal before duty: ₹4,800
- Illustrative 5% duty: ₹240
- Illustrative estimated total: ₹5,040
LMV-6 Small Industrial Tariff
- Energy charge: ₹7.30 per unit
- Fixed demand charge: ₹290 per kW per month
- Domestic benefit: Not applicable
Example: Small Industrial Consumer Using 1,000 Units
For an industrial connection with a sanctioned load of 10 kW:
- Energy charge: 1,000 × ₹7.30 = ₹7,300
- Fixed demand charge: 10 × ₹290 = ₹2,900
- Three Phase meter rent: ₹50
- Subtotal before duty: ₹10,250
- Illustrative 5% duty: ₹512.50
- Illustrative estimated total: ₹10,762.50
How the Estimated UPPCL Bill Is Calculated
- Select the correct consumer category.
- Enter total monthly electricity consumption.
- Enter sanctioned load in kW.
- Select Single Phase or Three Phase.
- Calculate energy charges through applicable tariff slabs.
- Add the category-specific per-kW fixed demand charge.
- Add the applicable meter rent.
- Calculate the configured 5% Electricity Duty.
- Display every component and the estimated payable amount.
Electricity-Saving Tips for UPPCL Consumers
- Monitor monthly usage near the major tariff slab limits.
- Use LED lighting and energy-efficient appliances.
- Set air conditioners near 24–26°C.
- Switch off unused chargers and standby devices.
- Maintain refrigerators, water pumps, and industrial equipment.
- Use the sanctioned load printed on the official bill.
- Select the correct Urban, Rural, BPL, Commercial, or Industrial category.
- Confirm whether the meter is Single Phase or Three Phase.
The official electricity bill may also include arrears, delayed payment surcharge, meter adjustments, security-deposit revisions, penalties, rounding differences, or updated regulatory charges.
Frequently Asked Questions
How accurate is the UPPCL Electricity Bill Calculator?
The calculator uses the supplied UPERC FY 2026–27 tariff information to estimate LMV-1 Urban, LMV-1 Rural, BPL Lifeline, LMV-2 Commercial, and LMV-6 Industrial bills. It includes energy charges, sanctioned-load-based fixed charges, meter rent, and 5% Electricity Duty. The official bill may differ because of tariff revisions, arrears, penalties, or account-specific adjustments.
What is the full form of UPPCL?
UPPCL stands for Uttar Pradesh Power Corporation Limited. The calculator provides an estimation structure for eligible electricity consumers served through the major Uttar Pradesh distribution companies.
Which Uttar Pradesh DISCOMs are supported?
The calculator can be used for eligible consumers in PVVNL, MVVNL, DVVNL, PuVVNL, and KESCO service areas when the same supplied tariff rules apply to the selected consumer category.
Which cities can use the UPPCL bill calculator?
Eligible consumers in Noida, Ghaziabad, Meerut, Lucknow, Kanpur, Agra, Varanasi, Prayagraj, Gorakhpur, and other covered Uttar Pradesh areas can use the calculator.
What is an LMV-1 Domestic connection?
LMV-1 is the domestic electricity category used for eligible residential consumers. The calculator provides separate supplied tariff structures for Urban, Rural, and BPL Lifeline domestic connections.
What is the difference between Urban and Rural domestic tariffs?
Urban and Rural consumers use different energy rates and fixed demand charges. Under the supplied data, Urban Domestic fixed charges are ₹110 per kW per month, while Rural Domestic fixed charges are ₹90 per kW per month.
How does the UPPCL telescopic tariff calculation work?
Monthly consumption is distributed across the applicable tariff slabs. Only the units falling within a particular slab are charged at that slab’s rate instead of multiplying the complete consumption by the highest rate reached.
What are the supplied Urban Domestic electricity rates?
The supplied Urban LMV-1 rates are ₹5.50 per unit for the first 150 units, ₹6.00 from 151 to 300, ₹6.50 from 301 to 500, and ₹7.00 per unit above 500.
What are the supplied Rural Domestic electricity rates?
The supplied Rural LMV-1 rates are ₹3.35 per unit for the first 100 units, ₹3.85 from 101 to 150, ₹5.00 from 151 to 300, ₹5.50 from 301 to 500, and ₹6.00 per unit above 500.
How are 280 Urban Domestic units calculated?
The first 150 units cost ₹825 at ₹5.50 per unit, and the remaining 130 units cost ₹780 at ₹6.00. The total energy charge is ₹1,605 before fixed demand charge, meter rent, and Electricity Duty.
How are 280 Rural Domestic units calculated?
The first 100 units cost ₹335, the next 50 units cost ₹192.50, and the remaining 130 units cost ₹650. The total energy charge is ₹1,177.50 before fixed demand charge, meter rent, and duty.
How are 550 Urban Domestic units calculated?
The first 150 units cost ₹825, the next 150 cost ₹900, the next 200 cost ₹1,300, and the remaining 50 cost ₹350. The total energy charge is ₹3,375 before additional components.
How is the domestic fixed demand charge calculated?
The fixed demand charge is calculated by multiplying sanctioned load by the applicable category rate. For example, a 2 kW Urban Domestic connection receives a charge of 2 × ₹110, or ₹220 per month.
Where can I find my sanctioned load?
The sanctioned load is generally printed on the latest electricity bill or connection document. Enter the official kW value rather than estimating it from installed appliances.
What is the BPL Lifeline tariff?
The supplied BPL Lifeline tariff uses an energy rate of ₹3.00 per unit and a fixed charge of ₹50 per kW per month for an eligible domestic connection with load not exceeding 1 kW.
Does the BPL Lifeline category include free electricity units?
The supplied data does not specify a free-unit benefit or separate consumption limit. The calculator should therefore use only the configured BPL tariff and eligibility rules.
How is an 80-unit BPL bill calculated?
The energy charge is 80 × ₹3.00, or ₹240. For a 1 kW connection, the fixed charge is ₹50. Meter rent and the configured 5% Electricity Duty are added separately.
What is the Single Phase meter rent?
The supplied Single Phase meter rent is ₹20 per month. It is displayed separately from energy charges, fixed demand charges, and Electricity Duty.
What is the Three Phase meter rent?
The supplied Three Phase meter rent is ₹50 per month. Selecting the correct meter phase is important for a useful estimate.
How is 5% Electricity Duty calculated?
The calculator applies the configured 5% Electricity Duty to the taxable billing components used by the tool. The estimated duty is shown separately, while the official taxable base should be checked on the actual electricity bill.
How is an LMV-2 Commercial bill calculated?
The supplied Commercial tariff is ₹7.50 per unit for the first 300 units and ₹8.50 for units above 300. A fixed demand charge of ₹330 per kW per month, meter rent, and duty are added separately.
How are 400 Commercial units calculated?
Using the supplied telescopic treatment, the first 300 units cost ₹2,250 and the remaining 100 cost ₹850. The energy charge is ₹3,100 before the per-kW fixed demand charge, meter rent, and duty.
How is an LMV-6 Industrial bill calculated?
LMV-6 Small Industrial consumption is calculated at the supplied rate of ₹7.30 per unit. A fixed demand charge of ₹290 per kW per month, meter rent, and applicable Electricity Duty are added separately.
Can I calculate my Noida, Lucknow, or Kanpur electricity bill online?
Yes. Select the correct DISCOM zone and consumer category, enter monthly units and sanctioned load, choose the meter phase, and click Calculate Bill to view the estimated breakdown.
Why can the estimate differ from the official UPPCL bill?
The official bill may include tariff revisions, arrears, delayed payment surcharge, meter adjustments, security-deposit revisions, penalties, rounding differences, or additional regulatory components not included in the estimate.
Can I download or print the detailed UPPCL bill report?
Yes. The report can show DISCOM, consumer category, monthly units, slab-wise energy charges, sanctioned load, fixed demand charges, meter phase, meter rent, Electricity Duty, and estimated payable amount.
